NC Proof user guide

NC Proof checks CNC programs in your web browser. NC Proof Turn is for lathes (Haas ST with the NGC control, Fanuc 0i-TF) and NC Proof Mill is for machining centres (Haas VF-3 and Mini Mill, Doosan DNM 5700 with Fanuc 0i-MF). Both apps work the same way, so this guide covers them together and points out where they differ.

On this page

1. Getting started

  1. Go to app.ncproof.com and choose NC Proof Turn or NC Proof Mill.
  2. Without an account you get the free preview: it runs the sample programs built into each app, so you can try every button before you sign up.
  3. To open your own programs, sign in with your email address. NC Proof sends you a one-time code; there is no password to remember.
  4. Pick a plan (monthly or yearly). Every plan starts with a 7-day free trial, and one plan covers both Turn and Mill. See Pricing.

Where it runs. Use Chrome or Edge on a Windows PC, a Mac, a Windows tablet such as Surface, or an iPad. Safari and Firefox work too. Phone screens are too small for the app.

Install it like a program. In Chrome or Edge, use Install app to add NC Proof to your Start menu or Dock. On a Mac with Safari: File → Add to Dock. On an iPad: Share → Add to Home Screen.

Devices and offline use. One account can be signed in on up to 3 devices (browsers). Once you are signed in, NC Proof keeps working offline for up to 7 days, which is handy on a shop PC without internet.

2. The screen

  • Code panel (left): your program, with line numbers. The line being run is highlighted as the simulation plays.
  • 3D view (right): the stock, the machine fixture and the tool. The info panel shows the current tool, feed, spindle, coolant, line, setup and the tool-tip position from program zero (Turn) or work zero (Mill).
  • Timeline (bottom of the view): play, step and speed controls.
  • Lower panel: three tabs — Errors & warnings, Comments and Variables #.

You can drag the borders between the panels to resize them. Double-click a border to put it back to the default size.

3. Open a program

  • File → Open (Ctrl+O, or ⌘O on a Mac) opens a G-code file (.nc and similar text files) or an NC Proof setup file (.ncp, see section 11).
  • File → New starts an empty program. You can keep several programs open and switch between them.
  • In the free preview, choose a program from Settings → Sample programs.

Control. NC Proof reads the program the way the selected control does (Haas or Fanuc), including decimal-point rules and one-line or two-line cycles. It picks the control from the cycle syntax in the file and tells you when it switches. You can change it yourself under Control (Turn) or Machine (Mill).

Units. Inch (G20) and metric (G21) programs both work. Under Settings → Units you choose whether numbers on screen are shown in inches, millimetres, or the same unit as the program.

4. Stock, setups, machine and tools

Open Stock & tools to tell NC Proof what is on the machine. Most of it is filled in for you from the comments in your program header, so a good header saves time. For example:

(STOCK 1.500 DIA - STICK OUT 2.5)
(T101 CNMG 432 - OD ROUGH)
(T404 DCMT 21.51 - 0.5 BORING BAR)
(STOCK 4.0 X 3.0 X 1.0 - X0 Y0 TOP LEFT FRONT CORNER)
(T2 1/2 FLAT END MILL - FLUTE 1.0 - STICK OUT 1.5)

Check the values, change what’s needed, then press Apply & run again.

NC Proof Turn

  • Stock: stock diameter, bar length, pre-drilled hole (0 = solid), stick-out from the chuck for the first setup, and how much stock is left on the face above Z0.
  • Setups: each flip or bar pull is a new setup that starts at an M00 line. Choose the M00 line, then Flip part (with the overall part length and the new stick-out) or Advance stock (how far the bar moves out). Use + Add setup for more.
  • Machine: the G28 home position, the rapid rate, and tool nose radius compensation (G41/G42). With compensation on, the toolpath and the stock follow the control using each tool’s nose radius.
  • Tools: the type of each tool (OD turning, boring bar, grooving, threading, drills, live tools) and its size. For inserts, type the ISO code (CNMG, DCGT, VNMG…). The first letter sets the insert shape and holder angle, and the numbers set the nose radius. Add TIP 3 (or another number) in the tool comment if your tip direction differs from the usual one.

NC Proof Mill

  • Stock: a block (length X, width Y, height Z) or a round bar along X, and where X0, Y0 and the top of the stock sit (left, centre or right edge; front, centre or back edge).
  • Fixture: a vise (with how much stock sits above the jaws), an A-axis rotary table with a 3-jaw chuck (with grip length and an optional tailstock), or clamped on the table.
  • Machine: the machine home position (G28) and the rapid rate.
  • Tools: type (flat, ball or bull-nose end mill, face mill, drill, spot drill, tap, reamer, chamfer mill, thread mill, boring head and more), diameter, corner radius, flute length and stick-out from the holder. The flute length is used to catch the shank rubbing the part; the stick-out is used to catch the holder hitting the part.

Notes. Each program also has a Notes box for your own reminders. Notes are saved with the setup file.

5. Run and step through the program

Button What it does
|◀ Go to the start
◀◀ T / T ▶▶ Jump to the previous / next tool change
← / → Step back / forward one block
▶ Play / pause (also the Space key)
▶| Go to the end
◀ Play in reverse
  • Speed: the centre of the slider is 1x, the real machine time. Drag left to slow down and right to speed up. Double-click the slider to go back to 1x.
  • Stop at M00/M01: tick it to pause at every program stop, as the machine would.
  • Clicking a line in the code jumps the simulation to that line.

6. Move around the 3D view

Action Mouse / touch
Pan Left-button drag
Rotate Shift + left-button drag (on Windows also: hold the wheel button and drag)
Zoom Mouse wheel, or pinch on a touch screen
View menu Right-click in the view

The right-click menu has the standard views (front, top, end or side, 3D, reset view), Back / Forward through your earlier views, the Calculators, and switches for the toolpath, the tool, colour by tool, measuring and the dimension table.

In Turn, Half section cuts the part in half so you can see bores and inside grooves. The Fixture button hides the chuck, vise or table on screen; collision checks still run.

7. Read the results

Errors & warnings. When the program has run, this tab lists every problem with its line number. Click a message to jump to that line in the code and to that moment in the simulation. Some of the things NC Proof checks:

  • Rapid moves (G00) into the stock, and tools or holders hitting the chuck, jaws, vise or fixture.
  • Roughing and finishing cycles (G71/G72/G73/G70 on the lathe) with wrong P/Q blocks or profile direction.
  • Threading, grooving and drilling cycles, and cutter or tool nose radius compensation errors.
  • Spindle and coolant sense: cutting with the spindle stopped, no feed, G96 without a sensible spindle limit, coolant off.
  • Moves past the machine travel limits, and macro errors such as writing to read-only system variables.

If the program runs to the end with nothing to report, the tab says so.

Comments. Every comment line in the program, in order. Double-click one to jump to it in the code.

Variables #. For macro programs: each variable the program uses, its final value and the line that first set it. Click the line number to jump there.

8. Measure the part

Turn on Measure from the right-click menu, then pick a mode:

  • Face–face: click two parallel faces (shoulders, groove walls, end faces or diameters) to get the exact distance between them.
  • Point–point: click two points. Points snap to corners, edges and the centreline; hold Alt (Option on a Mac) for a free point.

Press Esc to clear a measurement.

The Dimension table (Turn) lists the finished part feature by feature: diameters, lengths, chamfers, tapers and threads, read from the simulated stock.

9. Edit the code

  • Double-click a line to edit it in place. Enter saves the line, Esc cancels, and ↑ / ↓ move to the next line.
  • Edit code switches to Edit & Wireframe mode: as you type, the toolpath redraws and the tool sits at the line your cursor is on. Press Ctrl+Enter (⌘+Enter) or choose Simulation & Stock to cut the 3D stock again and re-check for collisions.
  • Find: Ctrl+F (⌘F) searches the code; Ctrl+G (⌘G) goes to a line number. Enter and Shift+Enter move between matches.

Operations and the Operation window

Split a long program into named operations and jump between them as tabs:

  1. Right-click in the 3D view and choose Show → Operation window.
  2. Press + to start an operation at the line your cursor is on, or right-click a code line and choose Start operation here. Give it a name; NC Proof adds an (OP: name) comment line, which the machine skips. You can also type these lines yourself.
  3. Click a tab to see that operation’s code. The tab the tool is in is underlined, and a red or yellow dot marks an operation with an error or a warning.
  4. Edit the code right in the tab; it changes the one program. Drag a tab out to give that operation a window of its own.
  5. The (OP: …) lines are saved in the program; a .ncp setup file also remembers where the window was and which tab was open.

Read more: Operation window: split a long G-code program into named tabs.

10. Calculators

From the right-click menu, Calculators gives you shop math without leaving the program. Each one opens in its own small window, and you can have several open at once.

  • Threads: thread depth (K) and diameters for UN, metric, NPT, BSP, ACME and trapezoidal threads, plus the fit with a mating part.
  • Speeds & feeds.
  • Turn only: chamfer, corner radius and grooving (OD / ID).
  • Drilling: centre drill diameter, spot drill / chamfer mill, drill depth for the point angle, tap drill, and a drill size chart (number, letter, fraction and metric drills).
  • Bolt hole circle.
  • Triangles: right, isosceles and any triangle.

11. Save your work

  • Save .nc (Ctrl+S / ⌘S) and Save as… .nc (Ctrl+Shift+S) save the program code to send to the machine.
  • Save .nc & setup (.ncp) saves the code together with the stock, setups, tools, fixture and your notes. Open the .ncp file later and everything is set up the way you left it.
  • Copy code puts the whole program on the clipboard.

12. Settings

Settings holds the sample programs, the display units, the code font size, and the colour theme (dark, light or follow your system).

13. Keyboard shortcuts

Keys Action
Space Play / pause
← / → Step one block back / forward
Ctrl/⌘ + O Open a file
Ctrl/⌘ + S Save
Ctrl/⌘ + Shift + S Save as
Ctrl/⌘ + F Find in the code
Ctrl/⌘ + G Go to a line number
Ctrl/⌘ + Enter Run the simulation (cut the stock again)
Esc Clear a measurement / close a menu

14. Your account and plan

On app.ncproof.com the Your account box shows your plan and the devices you’re signed in on. Manage plan opens the billing page, where you can change your card, switch between monthly and yearly, see invoices, or cancel. If you cancel during the trial, you aren’t charged. The Refund Policy and Terms have the details.

Questions or a program that doesn’t behave the way your machine does? Use Contact at the bottom of this page. A short sample of the code helps us find the problem quickly.