Tilt the table. Check every angle.

NC Proof Mill simulates 5-axis programs for the Haas UMC-750 (G254, G268, G253, G234 TCPC, G93) and Fanuc B / C tables (G68.2, G68.3, G68.4, G53.1, G53.6).

5-axis programs are the ones you least want to prove on the machine. NC Proof Mill turns the B tilt and C platter of a trunnion table the way the control does, cuts the stock with the part tilted, and checks the tool, the holder and the trunnion at every angle.

NC Proof Mill on a Haas UMC-750: the table tilted to B45 while a ball end mill breaks the top edge of a round hub with TCPC (G234), C turning through 360 degrees
Haas UMC-750 · TCPC (G234): the table at B45, C turning, the ball end mill breaking the top edge

Haas UMC-750

  • 3+2 with DWO (G254 / G255): turn the table to a B / C angle and keep cutting in the part’s own X, Y and Z.
  • Tilted planes (G268 / G269) and G253: define a feature plane and let the table turn so the spindle is normal to it. NC Proof tells you which B and C the table goes to.
  • TCPC (G234): true simultaneous 5-axis moves, with the tool tip kept on the part while B and C turn, and G93 inverse-time feed.
  • B / C work offsets, setups and round stock standing on the platter (set how high the part sits above it).
  • Trunnion collisions: the tool and holder against the tilting trunnion and the platter, not only the part.
  • B and C in the info panel as the table turns, in the angles of the program.
NC Proof Mill on a Haas UMC-750: the table at B90 with DWO (G254) while a flat end mill cuts a flat on the side of the round hub
Haas UMC-750 · 3+2 with DWO (G254): the table at B90, cutting a flat on the side of the hub

Fanuc 5-axis (B / C table)

For machining centres with a Fanuc control and a B / C trunnion table (sized like the UMC-750):

  • G68.2 tilted working plane, with Euler angles and the P1–P4 forms, G68.3 (plane from the tool axis) and G68.4 (incremental).
  • G53.1: the table turns to the angles of the tilted plane.
  • G53.6: the table turns while the tool tip stays on the part.

How to use it

  1. Open a 5-axis program. NC Proof picks the Haas UMC-750 from the codes in the file, or choose it (or Fanuc · 5 axes B / C) in the Machine box.
  2. In Stock & tools → Fixture, check the stock on the platter and how high it sits.
  3. Press Ctrl+Enter to cut and check. Try the built-in sample O20005 · Haas UMC-750 to see 3+2, a tilted plane and TCPC in one program.

Step-by-step help: Guide, section 4: Stock, setups, machine and tools.

More features